background image

1

 WARNINGS

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment 

or cause serious injury, even death.

• 

Only a person qualifi ed in the technical fi elds concerned (electricity, hydraulics or 

refrigerati on)  is  authorised  to  perform  this  procedure.  The  qualifi ed  technician 

working on the appliance must use/wear personal protecti ve equipment (such as 

safety goggles and protecti ve gloves, etc.) in order to reduce the risk of injury oc-

curring when working on the appliance.

• 

Before servicing the appliance, ensure that it is switched off  and isolated from the 

power supply circuit. 

• 

The appliance is intended to be used only for swimming pools and spas; it must not 

be used for any purpose other than that for which it has been designed.

• 

This appliance is not intended for use by children.

• 

This appliance is not intended for use by persons (including children, aged 8 years 

and above) with reduced physical, sensory or mental capabiliti es or lack of experi-

ence and knowledge, unless:

    -   they have been given supervision or instructi on, by a person responsible for their 

safety, concerning use of the appliance in a safe way by a person responsible for 

their safety; and

    - they clearly understand the hazards involved.

• 

Children should be supervised to ensure that they do not play with the appliance.

• 

The appliance must be installed according to the manufacturer’s instructi ons and 

in compliance with all applicable local and nati onal standards. The installer is re-

sponsible for installing the appliance and for compliance with nati onal installati on 

regulati ons. Under no circumstances may the manufacturer be held liable in the 

event of failure to comply with applicable local installati on standards.

• 

For any work other than the simple user maintenance described in this manual, the 

product should be referred to a qualifi ed professional.

• 

Incorrect installati on and/or use may cause serious damage to property or serious 

injuries (possibly causing death). 

• 

All equipment, even postage and packing paid, travels at the risks and perils of the 

recipient. The latt er shall issue reserves in writi ng on the carrier's delivery slip if 

damage is detected, caused during transport (confi rmati on to be sent to the car-

rier within 48 hours by registered lett er). In the event that an appliance containing 

coolant has been turned on its side, menti on your reservati ons in writi ng to the 

carrier.

• 

If the appliance suff ers a malfuncti on, do not try to repair it yourself; instead con-

tact a qualifi ed technician.

• 

Refer to the warranty conditi ons for details of the permitt ed water balance values 

for operati ng the appliance.

• 

In additi on to using spare parts manufactured by unauthorised third-party manu-

facturers, deacti vati ng, eliminati ng or by-passing any of the safety mechanisms in-

tegral to the appliance, will automati cally void the warranty.

• 

Do not spray insecti cide or any other chemical (infl ammable or non-infl ammable) 

in the directi on of the appliance, as this may damage the body and cause a fi re.

• 

Do not touch the fan and/or any moving parts and do not insert anything, including 

your fi ngers in the vicinity of the moving parts while the appliance is in operati on.

EN

Содержание Chlor Perfect






















Отзывы: