8
H0354600.F - EN - 2015-12
3.4 I Adjusting the water flow
• The filtration pump must be operating.
• Check the water flow regularly to ensure the best possible cleaning performance and to make it easier for the cleaner
to climb the sides.
• The cleaner is equipped with a flow regulator which automatically adjusts the water flow through the cleaner. It
indicates whether the water flow is ok or excessive:
YELLOW
= flow ok /
RED
= flow excessive
: Flow regulator
: Control
3.4.1 Checking the wheel rotation speed
• The filtration pump must be operating.
• Switch on the filtration pump (have a stopwatch ready).
• Raise the cleaner to below the surface of the water, keeping it submerged.
• Note the yellow indicator on the rear right wheel.
• For MX8-MX8 PRO: Wait until the wheels change direction and log the time until the wheels have performed 10 turns
(see image ).
• Adjust the water flow according to the time logged (see image ).
10 turns
Seconds
26-50
20-25
10-19
Increase the flow
Flow ok
Reduce the flow
3.4.2 Adjusting the water flow
• Adjust the water flow using the flow regulation valve provided with the device (see image ), or from the pool valves.
Increase the flow
Reduce the flow
EN
