![background image](http://html1.mh-extra.com/html/zodiac/baracuda-mx-6/baracuda-mx-6_instructions-for-installation-and-use-manual_4049729005.webp)
4
H0354600.F - EN - 2015-12
❷ Installation
2.1 I Setup
Hose length necessary
: Cleaner
: Hose sections
: Pool valves
: Brush socket
: Skimmer
: Filtering pump
: Filter
Brush socket connection example
2.2 I Hose section assembly
2.2.1 Determine the number of sections you need
• Measure the length between the brush socket or the skimmer and the furthest away point of the pool.
• Add an extra 1 metre to the length measured.
• It its total length is over 10 metres (MX
TM
6-MX
TM
630) or 12 metres (MX
TM
8-MX
TM
8 PRO), ask your reseller for an
additional set of hose sections (available as an option).
: Connection to the brush socket
or the skimmer
: Hose length necessary
: 1 metre section with floater
: Connection to the cleaner
Tip: insert the "right" quantity of hose sections
Inserting more hose sections than the length necessary to cover the whole pool is not recommended. Hoses
that are too long may limit the cleaner's performances.
2.2.2 Hose section assembly
• To assemble two hose sections, insert them then turn them until the connectors are at the maximum stop point, in
one of the 3 notches that provide the seal (see image )
.
• The section of hose that comprises the floater will be connected to the cleaner. The floater must be located
20-23 cm
away from the cleaner.
(see image ).
20-23 cm
EN