9
3.4 I Electrical supply connecti ons
To prevent risk of electrocuti on, fi re, or serious injury, be sure to adhere to the following:
• The use of an electrical extension cord is prohibited when connecti ng the control unit.
• Make sure that the socket is easily accessible at all ti mes and is protected from rain or splashes.
• The control box is splash-proof but must not be immeresed in water or any liquid. It must not
be installed in a fl oodable area; keep it at least 3.5 metres away from the edge of the pool and
avoid exposing it to direct sunlight.
• Positi on the control unit close to the socket.
•
Unscrew the protecti ve cap (see image ).
•
Connect the fl oati ng cable to the control unit and lock it into place by turning it clockwise (risk of damage to the
fl oati ng cable) (seeimage , )
.
•
Make sure that the connector is fully pushed in so that no water can get in (see image )
.
•
Connect the mains cable (see image ). The control unit should only be connected to a power outlet protected by a
30mA maximum, Residual Current Device (RCD)
(if in doubt contact a qualifi ed technician).