Zodiac Pool Systems MagnaPool, Инструкция по установке и эксплуатации

Страница: 14 / 28

12 13
connectinG to a controller
If you use an automation
or controller system to
control your pool you will
need to configure the
MagnaPool Control Centre
to allow “communication”
between the two.
You must set the controller type before making the wiring
connection.
settinG the controller
(to be done before making a wiring connection)
1. Switch power to the unit on.
2. Wait for the start-up sequence to complete.
3. Press the button.
4. Press the button to scroll down to ‘CONTROLLER’.
5. Press to enter the controller menu.
6. Press / to highlight the controller being used.
7. Press to save the controller setting.
8. The system will return to the main menu.
9. Press to return to the operating screen.
connectinG to a controller