ZNYX NetBlaster ZX470 Series, Руководство пользователя

Страница: 3 / 11

ZNYX NetBlaster 470 Series cPCI Fast Ethernet Adapter User’s Guide Page 3
Thank you for choosing the ZNYX NetBlaster 470 Series CompactPCI (cPCI) Fast Ethernet
Adapter. The NetBlaster 470 series is a fully featured product family of carrier Class
CompactPCI Fast Ethernet adapters for high availability applications requiring state-of-the-art
LAN interfaces. The 470 series features:
•
Four or Eight channel configurations, 6U form-factor
•
Rear I/O via passive 6U x 80mm rear transition module
•
Hot swap capability
•
64-bit data bus
•
Designed for NEBS Level 3 systems
Your adapter is designed to provide a lifetime of superior service in your system with cPCI slots.
NetBlaster ZX470 Series Fast Ethernet Adapter Models
Model Fast Ethernet Channels cPCI Slot
ZX474 Four 10/100 Mbps 6U
ZX478 Eight 10/100 Mbps 6U
ZX404H Four-channel rear transition module hub
connector (MDI-X) 6U
ZX404HAB Four-channel rear transition module hub
connector (MDI-X) with Type-AB interconnect 6U
ZX408H Eight-channel rear transition module hub
connector (MDI-X) 6U
ZX408HAB Eight-channel rear transition module hub
connector (MDI-X) with Type-AB interconnect 6U
ZX404A Four-channel rear transition module adapter
connector (MDI) 6U
ZX404AAB Four-channel rear transition module adapter
connector (MDI) with Type-AB interconnect 6U
ZX408A Eight-channel rear transition module adapter
connector (MDI) 6U
ZX408AAB Eight-channel rear transition module adapter
connector (MDI) with Type-AB interconnect 6U
Documentation and Software
Documentation and software for the NetBlaster adapter is distributed electronically. You can
retrieve most recent drivers and documentation and drivers from the ZNYX web site,
www.znyx.com in the driver download section. Please contact ZNYX Customer Support at (800)
724-0911 if you have trouble locating the appropriate driver or installation documentation.
Installation Procedure
There are two basic steps you need to follow to operate the NetBlaster adapter.
1. Install the hardware (NetBlaster adapter and rear transition card).
2. Install the driver.