ZNYX bh5700 Скачать руководство пользователя страница 192

Страница: 192 / 359

vrrpconfig

NAME

vrrpconfig

– Configure and control the running

vrrpd

SYNOPSIS

vrrpconfig [-d <level>] -- <vrrpd parameters>

vrrpconfig [-d <level>] [-k] [-a] [-p] [-s <vid>]

DESCRIPTION

vrrpconfig

provides communication with a running

vrrpd

daemon. The -- option for

vrrpconfig

will pass all parameters to

vrrpd

as would be done when starting the

vrrpd

Any output generated by

vrrpd

is displayed on the

vrrpconfig

controlling tty. Any action

normally taken by

vrrpd

for the given parameter is done so by

vrrpd

. Reference

vrrpd

for

vrrpd

parameters and their usage.

OPTIONS

vrrpconfig

also has a set of local options that are not passed to

vrrpd

directly. Many do,

however, retrieve information from the running

vrrpd

. The local options are as follows:

-d <level> Set the debug level. The default debug level is 1.
The higher the level, the more debugging output is produced.

Debugging output is sent to the controlling tty. This
debugging output is from vrrpconfig. To set the debug level

of vrrpd, one would use the vrrpd debug level setting option
placed after the -- in the vrrpconfig command line.

-a

Display in a user readable format, information about the

current state of all the Virtual Routers controlled by vrrpd.

-k

Kill vrrpd. The entire daemon is killed. Running this

command will require that vrrpd be restarted.

-p

Display relevant SNMP table values.

-s <vid>

Print a numeric representation of the state of the

Virtual Router associated with the Virtual Router Identifier
<vid>. The numeric representations are 1 = INIT, 2 = BACKUP,

and 3 = MASTER

Ethernet Switch Blade User's Guide

release 3.2.2j

page 192

Содержание bh5700








































































































































































































































































































































































Результаты поиска

Содержание bh5700

Отзывы:

ZNYX bh5700, Руководство пользователя, Страница: 192 / 359

Результаты поиска

Содержание bh5700

Отзывы: