IPCAM User Manual
9
2.2.2. PPPoE Installation
Under the condition, users need set PPPoE dialing parameter on IP Camera:
input the username and password ISP supplier’ offer permit IP Camera dialing
connects to Internet. As to set the PPPoE dialing parameter, you can connect device to
network through the first way, then write parameter to the device, also through
following third way, direct process parameter written to device. The way how to set
PPPoE, please refer to 3.4.5.for detailed steps
2.2.3. IP Camera & PC connection
This method is not used too often, when you process machine write parameter or
program shift, we recommend you adopt the first connect network way, to process the
modification of machine parameter.
connect to IP camera (note: don’t apply for wrong power), after one minute
