HOW TO INSTALL
Attach the Main Body to the
mounting location using the 3
screws supplied in your package.
As
shown
in
the
picture
,
push
the two
screws
into
the
two
holes
on
the
bottom
of the Main Body
,
then
rotate
the Main
Body until it clicks into place.
2
step
Adjust the slope of the lens by
using the tilt fixing screw on the
two sides. Make sure that the front of the
clear plastic Dome Cover is facing
the
camera’s
monitoring
area
.
The
round black Foam Insert should
be
flush
with the inside of
the
clear plastic
Dome Cover once the Dome Cover is
replaced onto the camera
.
Note
3
step
Last, attach the Dome Cover
to
the
Main
Body
.
Press the Dome
Cover onto the Main Body and screw the
Locker on clockwise until the locker is
tight. The
camera
is now installed on the
mounting location.
4
step
6
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax:
Tel: 0755-3363-1636
0755-3363-1639
