Zlpower IG 1000-24-C, Руководство пользователя

Страница: 8 / 11

time when the Inverter transfer from Normal mode to Battery mode during
power failure. Hence, you can connect the home equipments, such as
light bulb, fan, fluorescent tube, or TV when you select this mode.
Caution!! If you select the
‘
Wide
’
mode and connect the computer to the
output of Inverter, the computer may reboot if the input voltage is too low
to be accepted. In addition, the long transfer time will happen when power
failure makes the computer reboot.
Battery Connection
Step 1- Pinch the bottom of DC input cover and Open it. See Figure 4.
Step 2- Following battery polarity guide located near battery
terminal! Place the battery cable ring terminal over
Inverter
’
s battery terminal. Tighten the M5 nut. Do not
place anything between the flat part of battery terminal
and the battery cable ring terminal, or overheating may
occur.
Caution! DO NOT place anything between
battery cable ring terminals and battery
terminals. The terminal stud is not designed
to carry current. Apply Anti-oxidant paste to
terminals after terminals have been torqued.
Figure 4 Battery Cable Connection to Inverex