You may need also need to refer to instructions that relate to the specific DATA lead that you use to connect the interface to your radio. For
example, your radio may need certain parameters setting when using a radios 6 pin mini din socket.
When using other cables, your radio may need other settings to be made.
When you connect the interface to your PC and switch the interface on, Windows will detect and install drivers for you. You may be prompted
for drivers, if so allow Windows to search the net so as to obtain the latest drivers. Normally Windows will just install the drivers for you
without any prompts. Windows will tell you that the hardware has been installed and is ready to use. You can verify installation by using
Device Manager and looking at the entry for “Sound, video and game controllers. The entry “USB audio CODEC” is the hardware provided by
the DataLink interface.
View is looking into the 6 pin mini din socket, the same as you would see when wiring the rear of a 6 pin mini din plug.
