6
Once all attachments are in place, unwind a sufficient length of cable and insert the plug
into the wall outlet. A yellow mark on the power cord shows the ideal cable lenghth. Do not
pull the power cord beyond the red mark..
1. Insert the power plug into the wall outlet.
2.
Press the power on/off button located the unit to turn the vacuum cleaner “on”.
3. To rewind the power cord, press the cord rewind button with one hand and guide the
power cord with the other hand to ensure that it dose not whip causing damage or
injury.
4. To adjust the suction, rotate the speed control button to control the suction power of
the vacuum cleaner.
Clean the dust tank and filters
1. Press the knob on the dust cup arm.
2. Lift dust tank up.
3. Press release button to open the dust tank bottom cover.
4. Take out of the inside filter and wash
5. Take out of the air inlet HEPA filter and wash
Note:Please ensure that the filters are totally dry when you assemble them back.
Rewind button
On/off button
Speed control