Zline Trim Kit, Руководство по установке

Страница: 5 / 6

5 4
INSTALLATION
5. Push the microwave into the slot in the rear bracket by extending the support beam
(Figure 1).
6. Use screw #3 to fix the front bracket and support beam (Figure 2).
7. Insert the trim kit into the corresponding buckle seat.
INSTALLATION
Installation
①
②
①
Push the microwave which had install bracket into the slot in the rear bracket by extending the
support beam( picture 1)
将预装好的微波炉顺延着支撑横梁推到后支架卡槽内为止（如图一）
②
Use 3# screw to fix the front bracket and support beam( picture 2)
再用
3#
螺丝安装前支架与支撑横
梁对应孔位（如图二）
complete
Picture 1
Picture 2
Figure 1
Figure 2
2
①
Insert the trim kit into the corresponding buckle seat
将
预装好外观框卡进对应卡扣座里
Finish
Installation
Installation
1