Zline RK62342, Руководство по установке и инструкция пользователя

Страница: 37 / 104

29
Under Cabinet Installation
UNDER CABINET INSTALLATION
If you need to convert your under cabinet range hood
to rear ducting, use the following instructions. Please
note that converting the undercab to rear ducting is
a modification of the standard hood and part of the
installation process. It is recommended that the hood is
inspected before this procedure. Only certain undercab
models allow for rear ducting. Contact us at 1-614-777-
5004 for more information on compatible models.
1. First remove the screws from the stainless steel panel.
The small screws attach the panel to the range hood
while the larger screws attach the panel to the motor.
2. Remove the panel from the hood. The motor is
attached to the panel. Do not disconnect the motor
from the panel. The image to the right shows an
example of the motor orientation.
3. Remove the blower/motor from the range hood.
Be careful not to pull and disconnect the attached
wiring.
4. Rotate the blower/motor so that the opening is
facing out the rear of the range hood.
5. Replace the panel so that the opening aligns with the
opening of the blower/motor.
6. Attach the panel to the range hood then attach the
blower/motor to the panel using the larger screws.