23
YOU’LL NEED
• Adjustable wrench
• 90
°
elbow
• Teflon thread seal tape
STEP 6: INSTALL THE 90° WATER SUPPLY ELBOW
1. Install the 90° elbow onto the water valve. Do not overtighten the 90° elbow; the
water valve bracket could bend or the water valve fitting could break.
2. Position the end of the elbow to face the floor when the dishwasher is upright.
STEP 6: INSTALL THE 90° WATER SUPPLY ELBOW
1. Install the 90° elbow onto the water valve. Do not overtighten the 90° elbow.
The water valve bracket could bend or the water valve fitting could break.
2. Position the end of the elbow to face the floor when the dishwasher is upright.
YOU’LL NEED
• Adjustable wrench
• 90
°
elbow
• Teflon thread seal tape
INSTALLATION
20
W
ater Supply
Monument Dishwasher User Manual and Install Guide - English - USA - October 2022 - PRINT.indd 20
10/25/22 4:17 PM
90° elbow
Note
: After installation, the elbow
should face the dishwasher card slot
at the right on the bottom.
NOTE:
After installation,
the elbow should face the
dishwasher hose channel at
the bottom left.
INSTALLATION
23
W
ater Supply
