8
7
Placement
Pr
oduct Dimensions
BEFORE INSTALLATION
BEFORE INSTALLATION
STARTING UP THE APPLIANCE
• Before powering on initially, keep the refrigerator still for two hours before
connecting it to power supply.
• Before putting in any fresh or frozen food, the refrigerator should be run for 2-3
hours or for over 4 hours in summer when the ambient temperature is high.
• Leave enough space to open the doors.
PLACEMENT
• Before use, remove all packing materials, including bottom cushions, foam pads,
and tape inside of the refrigerator. Tear off the protective film on the doors and
the refrigerator body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist
or watery places to prevent rust or reduction of insulating effect.
• Do not spray or wash the refrigerator. Do not put the refrigerator in moist places
where it can be easily splashed with water, so as not to affect the electrical
insulation properties of the refrigerator.
• The refrigerator should be placed in a well-ventilated indoor place and the
ground shall be flat and sturdy (rotate left or right to adjust the adjustable leg for
leveling, if unstable).
• The top space of the refrigerator shall be greater than 1 1/2" - 2" and the
refrigerator should be placed against a wall with a free distance of more than
2" on the back and 1/2" - 1" on the sides. This facilitates heat dissipation.
62 11/16”*
(1593 mm)
*Working space before sliding into cabinet cut out
35 5/8”
(905 mm)
24 7/16”
(620 mm)
29”
(737 mm)
(3.2 mm)
13 9/16”
(344 mm)
13 9/16”
(344 mm)
43 3/16”
(1098 mm)
135
90
1/8“
(3.2 mm)
1/8“
2”
(51 mm)
(24.3/8”)
620 mm
17
43 mm
(29”)
737 mm
(68 5/8”)
17
76 mm
(69 7/8”)
106
7 mm
(42”)
62 11/16”*
(1593 mm)
*Working space before sliding into cabinet cut out
35 5/8”
(905 mm)
24 7/16”
(620 mm)
29”
(737 mm)
(3.2 mm)
13 9/16”
(344 mm)
13 9/16”
(344 mm)
43 3/16”
(1098 mm)
135
90
1/8“
(3.2 mm)
1/8“
2”
(51 mm)
(24.3/8”)
620 mm
17
43 mm
(29”)
737 mm
(68 5/8”)
17
76 mm
(69 7/8”)
106
7 mm
(42”)
62 11/16”*
(1593 mm)
*Working space before sliding into cabinet cut out
35 5/8”
(905 mm)
24 7/16”
(620 mm)
29”
(737 mm)
(3.2 mm)
13 9/16”
(344 mm)
13 9/16”
(344 mm)
43 3/16”
(1098 mm)
135
90
1/8“
(3.2 mm)
1/8“
2”
(51 mm)
(24.3/8”)
620 mm
17
43 mm
(29”)
737 mm
(68 5/8”)
17
76 mm
(69 7/8”)
106
7 mm
(42”)