13
ATTACHING THE CABINET MOUNTING BRACKETS
• With both units connected, you need to install cabinet mounting brackets provided with
your RBIV-30 parts kit before you can push the dual unit into place.
• Three cabinet mounting brackets go on the outer left and right sides of the dual RBIV-
60 unit, while four total brackets go on top of the dual unit — two on each RBIV-30.
• Using a screwdriver or drill with a Phillips-head bit, fasten 20 screws provided with the
RBIV-30 parts kit to secure all 10 cabinet mounting brackets to the dual unit.
• NOTE:
The image below is detailed in the RBIV-30 Installation manual and shows how
you would install a single RBIV unit — three brackets on each side and two on top.
Since you're installing a dual unit into one cabinet cutout, there is no need for cabinet
mounting brackets to be installed in the middle of both units.
Confident ial
46
F ix t he cabinet-cabin connecting bracket (Item No12) to the cabinet, where 2 on the top, and 3 on
every s ide.
Us e s crew cabinet connecting bracket (Item No11) to tighten.
WAR NING:
B efore s t arting to s crew the S ide and Upper brackets , pleas e m ake s ure that water is s upplied to the
product and there is no water leakage.
INSTALLATION
Cabinet Mounting Br
ack
ets
