CANFDNET-400U
High-performance Four-channel CANFD Bus-to-Ethernet Converter User Manual
©2021 Guangzhou ZLG Microelectronics Technology Corp.,Ltd.
15
User Manual
[Load configurations from files] Load configurations from the previously saved
configuration file into the baud rate, filter, relay, failback, frame map, merge and split
windows. To configure to a device, click the [Configure Device] button.
[Save configurations to files] Save the current baud rate, filtering, relay, failback,
frame mapping, merging and splitting and other window parameters to a file, which
facilitates next use or other devices.
4.3 Configuring Parameters
4.3.1 CAN
The CAN window is used to configure the two channel parameters of CANFDBridge,
such as baud rate, CAN controller type, and termination resistance enable, as shown in
Figure 4.4.
Figure 4.4 Baud rate
Each channel supports setting the controller type, as shown in Figure 4.5. When the
selected type is CAN, only CAN messages can be sent and received. You can set the port
controller type connected to the CAN bus to CAN to prevent CANFD messages from
being forwarded to the CAN bus. When the selected type is CANFD, both CAN messages
and CANFD messages can be sent and received.
Figure 4.5 Controller types
Each channel supports setting the CANFD protocol standard, as shown in Figure 4.6.
Both ISO and Non-ISO standards are supported.
