Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.
Personalize
USB
Manager
Autotest
System Info
Access
Control
Attendance
Search
L
13
Detection Management Settings
> [
] > [
] to
.
Click on
System
Detection Management
enter the setting interface
❷
When
Allow unregistered people to access
is enabled, optionally, set
Enable
capture of unregistered person
to save the temperature data.
❶
You can set the value of
High temperature alarm threshold
, and enable the
Temperature over the range; access denied
and the
Trigger external alarm
, the
device will send an alarm prompt when the temperature of the user detected
exceeds the set value, meanwhile the user will be forbidden to access, as shown in
the following figure. The method of enabling
Mask detection
is also the same.
08:50
Successfully verified.
Name:Mike
User ID:1
Verify:Face
Normal temperature
O
Temp.:
36.6 C
Mask Detected
08:50
Failed to verify.
Verify:Face
User ID:1
Without mask
High body temperature
O
Temp.:
38.6 C
Date Time
Access Logs Setting
Face
Palm Parameter
Video intercom parameter
Reset
Detection Management
USB Upgrade
Device Type Setting
37.30
0.00
Enable temp. screening with infrared
High temperature alarm threshold
Temp. over the range; access denied
Temperature deviation correction
Temp. Unit
Temperature measurement distance
Display Thermodynamics Figure
Display Body Temperature
Enable mask detection
Deny access without mask
Detection Management
Far
O
C
O
C
Display Body Temperature
Enable mask detection
Deny access without mask
Allow unregistered people to access
Enable capture of unregistered person
Trigger external alarm
Clear external alarm
Exter alarm delay(s)
Update Firmware
Display Thermodynamics Figure
Detection Management
