6
Add Device
After searching, select the
Standalone Terminal
and click [Add Device], and a dialog box will open.
Enter self-defined device name, device type set to Standalone Device and click [OK] to complete
device adding.
Note:
The default IP address of the Standalone Terminal may conflict with the IP of a device on the
Internet. You can modify its IP address: Click [Modify IP Address] behind the device and a dialog box
will open. Enter the new IP address and other parameters (Note: Must configure the gateway and IP
address in the same network segment).
2)
Register the UHF tag
Connect the UHF Card Issuer to a computer; click the
Personnel Profile
tab to register the UHF
tag, as shown in the figure below:
