10
The passing is not smooth after the
turnstile is opened, it encounters resistance
when pushing the arms, and the arms
cannot return to the home position after
they rotate.
It is caused by the Adjustable Tension Spring.
Adjust the Adjustable Tension Spring, as shown in Figure 5-3.
The arms drop during the use.
It may be caused by the problem of relative components or drop-arm
solenoid.
1.
Check whether there is any gap at the position shown in Figure 6-1.
2.
Check whether the drop-arm solenoid is totally closed. If not, power
off the equipment and power on it again 2 minutes later.
The turnstile allows people continue
passing one-way side during the use.
1.
Check the Turnstile-opening Solenoid
2.
Check whether the Turnstile-opening solenoid is operating, and
check whether the Turnstile-opening solenoid is stuck or the Metal
Shrapnel is broken, as shown in Figure 5-3.
Figure 6-1
Figure 6-2
Normal status (closed) of the drop-arm
solenoid after being powered on.
Normal status of the drop-arm solenoid
after being powered off
