ZKTeco SpeedFace-VSL Series, Руководство пользователя

Страница: 47 / 83

SpeedFace-VSL series User Manual
ltem
Description
1 :N Match Threshold
1 :1 Match Threshold
Face Enrollment
Threshold
Face Pitch Angle
Face Rotation Angle
lmage Quality
Minimum Face Size
LED Light Triggered
Threshold
P a g e 146
Under 1 :N verification mode, the verification will only be successful when the
similarity between the acquired facial image and all registered facial templates
is greater than the set value.
The valid value ranges from 65 to 120. The higher the thresholds, the lower the
misjudgment rate, the higher the rejection rate, and vice versa. The default
value of 75 is recommended.
Under 1 :1 verification mode, the verification will only be successful when the
similarity between the acquired facial image and the facial templates enrolled
in the device is greater than the set value.
The valid value ranges from 55 to 120. The higher the thresholds, the lower the
misjudgment rate, the higher the rejection rate, and vice versa. The default
value of 63 is recommended.
During face enrollment, 1 :N comparison is used to determine whether the user
has already registered before.
When the similarity between the acquired facial image and all registered facial
templates is greater than this threshold, it indicates that the face has already
been registered.
The pitch angle tolerance of a face for facial registration and comparison.
lf a face's pitch angle exceeds this set value, it will be filtered by the algorithm,
i.e. ignored by the terminal thus no registration and comparison interface will
be triggered.
The rotation angle tolerance of a face for facial template registration and
comparison.
lf a face's rotation angle exceeds this set value, it will be filtered by the
algorithm, i.e. ignored by the terminal thus no registration and comparison
interface will be triggered.
lmage quality for facial registration and comparison. The higher the value, the
clearer the image requires.
Required for facial registration and comparison.
lf an object's size is smaller than this set value, the object will be filtered and not
recognized as a face.
This value can be understood as the face comparison distance. The farther the
person is, the smaller the face is, and the smaller the face pixel will be obtained
by the algorithm. Therefore, adjusting this parameter can adjust the furthest
comparison distance of faces. When the value is 0, the face comparison
distance is not limited.
This value controls the חס and off of the LED light. The larger the value, the
more frequently the LED light will be turned .חס
Copyright@2020 ZKTECO CO., LTD. AII rights reserved.