View records on the software
3. View records
Click [
Access
] > [
Reports
] > [
All Transactions
] on the software to view the records.
12.
WIFI Settings
Click [
Advanced Settings
] > [
WIFI Settings
] to enable the Wi-Fi function, set
SSID and enter the password. Until the connection status shows “Connected”,
which indicates that the WIFI connection is successful.
1
2
3
4
5
Connected
6
13.
Factory Reset
If you forget the WebServer password, you can restore the factory settings by press-
ing and holding the reset button for
5
seconds, and then logging in again with the
initial password.
Note:
This function does not have any clear registered user data.
11
