ZKTeco iClock 885, Руководство пользователя

Страница: 34 / 114

COMMUNICATION
34
3
SYSTEM
34
4
You can change the retry times from the image above. The value ranges
from 1 to 6.
Here you can select the
Fingerprint Image
to be shown. If you select this
option the display of the fingerprint image on the screen will be shown.
The default value Medium is recommended. You can set the sensitivity of
fingerprint collection to High when the response to finger scan lags in a dry
environment. When the usage environment is humid, you can set the sensi-
tivity of fingerprint collection to Low if the fingerprint is difficult to identify.
This parameter is used to set the retry times in the event of failure of 1:1 veri-
fication or password verification due to an absence of fingerprint enrollment
or improper finger placement, so as to avoid repetitive operations.
Select
FP sensor Sensitivity
and press
OK
. It is used to set the sensitivity of
fingerprint collection.
Here you can change the fingerprint image to be shown while enrolling or
to match and never