ProFace X [TD]
User Manual
P a g e
| 66
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
can check out again; otherwise, the alarm will be triggered.
Duress Options Settings
9.6
If a user activated the duress verification function with specific authentication method(s), when he/she is
under coercion during authentication with such method, the device will unlock the door as usual, but at
the same time a signal will be sent to trigger the alarm.
Click
Duress Options
on the Access Control interface.
Item
Description
Alarm on Password
When a user uses the password verification method, an alarm signal will be
generated, otherwise there will be no alarm signal.
Alarm Delay (s)
Alarm signal will not be transmitted until the alarm delay time is elapsed. The
value ranges from 1 to 999 seconds.
Duress Password
Set the 6-digit duress password. When the user enters this duress password for
verification, an alarm signal will be generated.
