Installation and Connection 7
3.2
Installation of Access Control Panel Wires
Access Control Panel Wire Installation Diagram
Remarks:
Before connection, make sure the power supply is disconnected, because connection with power
connected will cause severe damage to the equipment.
The access control wires must be separated according to heavy and light current; the control panel
wires, electronic lock wires, and exit button wires must run through their respective casing pipes.
TCP/IP network communication wire or PoE line (for PoE only)
RS485 network communication wire
Control Panel
Door sensor
Electronic lock
Exit button
Indoor reader
Outdoor
reader
Outdoor
Indoor
+12V power line
Ceiling
Wireless network (WIFI) communication
