BR1200 User Manual
P a g e
|
30
z
Circulation Delete Access Records:
It is the number of access logs allowed to be deleted at a
time when the maximum storage is attained. It can be disabled or set to a value ranging from
1 to 999.
z
Confirm Screen Delay(s):
It is the duration for displaying the verification information
interface after verification. The value ranges from 1 to 9 seconds.
7.3 Fingerprint Parameters
When the device is on the initial interface, press
button >
System Settings
>
Fingerprint
to
enter the
Fingerprint
setting
interface.
z
1:1 Match Threshold:
Under 1:1 Verification Method; it is a value of similarity required,
between the verifying fingerprint and the user’s registered fingerprint. The value of similarity
must be greater than this value to get successful verification.
z
1:N Match Threshold:
Under 1:N Verification Method, it is a value of similarity required,
between the verifying fingerprint and all the registered fingerprints of the user. The value of
similarity must be greater than this value to get successful verification.
z
FP Sensor Sensitivity:
It is used to set the sensitivity of fingerprint collection. It is
recommended to use the default level “
Medium
”. When the environment is dry, the fingerprint
detection becomes slow, you can set the level to “
High
” to raise the sensibility; when the
environment is humid, it gets hard to identify the fingerprint, you can set the level to “
Low
”.
z
1:1 Retry Times:
In 1:1 Verification or Password Verification, users might forget the registered
fingerprint or password, or presses the finger improperly. To reduce the process of re-entering
user ID, retrying is allowed; the number of retries can be within 1 ~ 9.
z
Fingerprint Image:
To set whether to display the fingerprint image on the screen during
registration or verification. Four choices are available.
