BG1000 Series Barrier Gate
User Manual
P a g e
| 29
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Step 9: Replace the spring to the right, then connect it to the spring connecting arm
and install it, as shown in the figure:
Step 10: After adjusting the vertical and parallel angles of the barrier boom, finally
tighten the two screws of the spindle connecting arm, as shown in the figure:
Step 11: Finally, set the L-D parameter on the control panel to "2" (note that L is "1" and
R is "2").
