ZKTeco Aurora T1, Быстрый старт

Страница: 3 / 12

-2-
3.
Device Installation
Mount on the Desk
Mount on the Wall
3 2
L
1 3 2 1 1
1 1
4) Use the 3M double-sided tape to fix the device on the desktop.
1 4
1) Hold the Device with both the hands, and rotate the back cover to 180 degree to
disassemble the Device.
2) Pass the power cable through the wiring hole of the back cover and insert it into the
power interface.
3) After wiring the power cable, push the back cover onto the Device, and rotate it in the
clockwise direction to close it.
1) Hold the Device with both the hands, rotate the back cover to disassemble the Device.
2) Pass the power cable through the wiring hole of the back cover and insert it into the
power interface.
3) Push the back cover on the wall then drill holes, and then fix it with expansion
tubesand screws.
4) Attach the Device onto the back cover, and rotate the Device in the clockwise
direction to close it.