http://www.zketech.com
EBC-A05 User Manual
Copyright (C) 2006-2015 ZKE Technology
The first line shows testing mode, voltage and current. Testing modes include:
²
CC
–
constant current discharging
²
CP
–
constant power discharging
²
Ni
–
NiMH/NiCd charging
²
Li
–
LiPo/LiFe charging
²
Pb
–
plumbic acid battery charging
²
CV
–
custom constant voltage charging
²
PW
–
fixed voltage output (5V/2A)
The second line shows working process, working time (in minute) and capacity (automatic
switch between 0000mAh and 00.00Ah).
Working process reads OFF when the test stops and DSC or CHG in testing. It shows AT1 if
you choose automatic charging/discharging and 1 means the step 1 of current testing.
A short press on the
“
SET
”
button and the display changes to power and energy.
In automatic
“
charging-discharging-charging
”
test, you can check test results of each step by a
short press on
“
INC
”
or
“
DEC
”
buttons.
Press the
“
ON
”
button to start testing and one more press to stop.
You can open setting interface by press on the
“
SET
”
button for 2 seconds in the stop state
(This function is invalid when the tester being connected with the PC software).
4.3 Setting Interface
The cursor default is on mode setting. Press the
“
SET
”
button to move it to the value you want
to set up. One press on
“
SET
”
and the cursor moves one digital toward right. Press the
“
INC
”
and
“
DEC
”
buttons to modify the value. Press the
“
ON
”
button the move to the next item. It
will go back to the limit value if your setting exceeds the allowed range.
1) CC discharging
First line: mode and discharging current setting.
Second line: cut-off voltage (testing automatically stops when voltage reaches below this value)
and the maximum testing time setting (no time limit if being set 0).
2) CP discharging
