User’s Manual for ZKIP4 Series Cube IP Camera V1.7
8
2 Installation and Network Configuration
2.1 Hardware Installation
Installation Notices:
1.
Read through the guide for installation prior to installation.
2.
Check whether any component is missing against the packing list, if yes,
please contact your supplier.
3.
Wire during power off. If the camera does not function normally during
operation, please cut off the power before check.
Note
: The wiring during power on may seriously damage the camera, which
will be disqualified from the guarantee.
4.
Use the power supply of DC12V and no lower than 1A for the camera or PoE
power supply (optional). Too high or low voltage, or AC power supply may
cause the abnormal operation of the camera.
Содержание ZKIP472
Страница 4: ......
Страница 9: ...Overview 5 Dimensional Drawing in mm Front View Right View ...
