Zizito VESTA II, Руководство пользователя

Страница: 16 / 102

16
It can be expected that the system will comply with the installation if the man-
ufacturer has stated in the vehicle’s operating instructions that it is suitable for
the installation of a “universal” child restraint system for this age group.
This child restraint system is categorized as ‘universal’ under conditions more
stringent than the ones that applied to previous models which did not have this
notice.
If in doubt, please, consult the manufacturer or dealer of the child restraint
system.
•
The seat is only suitable if the approved vehicles are fitted with three-point
retractor safety belts, approved in accordance with the UNECE Regulation
16 or other equivalent standards.
• Rigid parts and parts of the child restraint system made of plastic must be
positioned and installed in such a way that when the vehicle is in normal
operation they cannot be trapped by a sliding seat or by a car door inside
the vehicle.
• Children are safer when properly restrained in rear vehicle seating posi-
tions. Whenever possible secure the booster seat in the center position
of the seat directly behind the front seats. However, this position is often
equipped with a lap belt only and cannot be used.
• NEVER use a lap - only belt
• The vehicle seat MUST face forward
and chose the positing as below
• Note: This booster seat only suitable to use in the class of passenger cars
(M1).
EN