Chapter 2: Installing the fire control panel
26
ZP3 Fire Alarm Control Panel Installation Manual
Unpacking or packing
The panel is shipped with the panel fully assembled. As only the panel backbox
is normally mounted during the installation, the design anticipates that you will
remove the door assembly and main chassis before the cabinet is sent to the site
for electrical installation.
Extra cartons are included with the original packaging to allow repacking the door
assembly and chassis. These can then be stored until they are needed for
commissioning.
The panel packaging is shown in Figure 21.
Figure 21: Unpacking the panel
Door Carton
Panel Tray
Side Buffer
Back Buffer
Front Buffer
Inner Spacer
Shipping Carton
ZP3 Panel
Panel Cover Pad
Open into carton
Open into carton
Retain cover
Retain carton
A
B
C
D
