Chapter 1: Overview
20
ZP3 Fire Alarm Control Panel Installation Manual
Mounting auxiliary boards
The basic panel incorporates a standard range of inputs and outputs. If additional
inputs or outputs are required, a range of optional modules is available that fit
into the panel. The auxiliary I/O boards mount onto the auxiliary chassis as
shown in Figure 18.
Figure 18: Mounting auxiliary boards
1. Position A
2. Position B
3. Position C
The maximum number of auxiliary boards that can be fitted into a panel is three.
This can be all of one type, or a mix of types. This provides from 24 to 72 outputs
within the cabinet. If additional auxiliary boards are required, these must be
mounted in a separate remote control cabinet. Various size cabinets are
available, and each panel can support up to 896 outputs, of which 768 are freely
programmable.
Auxiliary boards and modules
The following I/O auxiliary boards are available:
• ZP3AB-MIP8 Input Board (8-way). See “ZP3AB-MIP8 Input Board” on page
60
• ZP3AB-RL8 Relay Board (8-way), See “ZP3AB-RL8 Relay Board” on page 56
• ZP3AB-MA8 Monitored Output Board (8-way). See “ZP3AB-MA8 Monitored
Output Board” on page 57
• ZP3AB-OP24 Transistor Output Board (24-way). See “ZP3AB-OP24
Transistor Output Board” on page 59
1
2
3
