Fit the Smaller O-Ring
Fit the Smaller O-Ring (Item 6) to the top of the Wireless
Module
as shown in Figure 4.
Figure 4
Fit the Sounder / Visual Indicator
Re-attach the Sounder / Visual Indicator to the Wireless
Module
as shown in Figure 5.
Figure 5
Remove the Mounting Plate
Remove the Mounting Plate from the Wireless Module, by
turning it counter clockwise as shown in Figure 6.
Figure 6
Remove the Screws
Remove the three exposed screws. See Figure 7. The
battery retaining plate can also be removed.
Figure 7
Fit the Larger O-Ring
Fit the Larger O-Ring (item 5) to the Perspex Mounting
Plate as shown in Figure 8.
Figure 8
Fit the Device to the Mounting Plate
Fit the device to the Perspex Mounting Plate (Item 2) with
the O-Ring between them as shown. in Figure 9.
Figure 9
Secure the Mounting Plate
The device’s and the plate’s holes should align.
Secure the device to the Perspex Mounting Plate using
the washers and screws (items 1 and 3).
See Figure 10.
Figure 10
Fit the Device to the Wall
Fix the weatherproof device securely to the wall using
suitable 4mm countersunk screws as shown in Figure 11.
Note: The rubber plug should be located at the bottom of
the device.
Figure 11
