ZIROX SGM7, Руководство пользователя

Страница: 41 / 43

Oxygen Monitor SGM7 10 Appendix
HB_SGM7_eng.docx
41
10.6 Warranty conditions
ZIROX Sensoren & Elektronik GmbH warrants that the products
manufactured and sold are free from manufacturing and material defects at
the time of dispatch. In case of defects and faults within 12 months (probe)
and 24 months (electronics assembly) respectively after dispatch, ZIROX will
clear faults at its own option by repair or replacement. The purchaser must
give prompt written notice to ZIROX. The purchaser is not entitled to claim
other legal remedies based on this warranty.
ZIROX does not warrant supplied products which are subject to normal wear
and tear (e.g. reference gas pump).
Corrosive gases and solid particles may cause damage and require repair or
replacement due to normal wear and tear.
The contact of the products with explosive gas compounds, halogens in high
concentrations and sulphuric gases (e.g. SO
2
) is not permitted.
The contact of the products with siliconic or phosphoric compounds is not
permitted either.
A connection of ZIROX and non-ZIROX products voids any warranty claims.
Warranty and warranty claims are only accepted if they are in accordance
with the "General Sales and Delivery Conditions" of the manufacturer.
Warranty and liability claims for damage to persons and/or property are void
if they are subject to the following:
• Normal wear and tear
• Improper use of the product
• Disregard of the manual’s instructions
• Improper installation, initiation, operation and
maintenance of the product
• Operation of the product without protective measures
• Unauthorized functional and technical modification of the product
• Dismantling of parts as well as installation of spare
parts or additional units which are not delivered or
permitted by the manufacturer
• Improper repairs or faulty operation
•
External impact
• Acts of God
Attention: During installation of the equipment, the customer must ensure
that all necessary supply lines are connected and the operating temperature
of the probe is reached. Experience has shown that products installed but
not in use may be damaged by the process or by external influence. ZIROX
will not accept any responsibility for such damage.