Zirkon zahn zirkonofen 600/V3, Руководство оператора и по техническому обслуживанию

Страница: 31 / 40

31 31 CHAPTER 7
CLEANING AND MAINTENANCE
SAFETY MEASURES WHEN CLEANING THE DEVICE
- Wear respiratory protection, safety goggles and protective gloves when cleaning the device.
- Unplug from mains power!
ATTENTION : When designing the device we assumed that all operators have a basic technical
knowledge. Therefore, all cleaning and maintenance work can be easily carried out without
RTQHGUUKQPECUGQHFQWDVEQPUWNV<KTMQP\CJPQTVJGUGTXKEGEGPVGTUURGEKſGFKP[QWT
maintenance contract.
Disconnect the device from power supply
During any maintenance or cleaning, the Zirkonofen 600/V3 sintering furnace must be
disconnected from power supply.
DRY CLEANING
- IMPORTANT: The use of compressed air, water or solvent is prohibited!
- Clean with a dry cloth, a brush and a vacuum cleaner only (visible dusty parts only)
- Do not wet-clean neither use solvents Only use a cleaning agent recommended by Zirkonzahn
- Do not clean with compressed air, to prevent dust dispersion in the surrounding area
- IMPORTANT: Do not touch heating elements!
CLEANING AND
MAINTENANCE