Zirkon zahn Face Hunter, Руководство оператора и по техническому обслуживанию, Страница: 16 / 40

16 16 CHAPTER
SAFETY AND RESIDUAL RISKS
Residual risks
- In the event of equipment defects push the EMERGENCY SHUTDOWN switch and follow
hazard warnings.
- Avoid residual risks by increased attentiveness.
- Pay attention to risks at the installation site.
- Defective power supply lines.
- Fire hazard if the device is operated unattended.
- Danger of burns at the ventilation opening, do not touch neither during operation nor
immediately afterwards.
- Eye damage: Do not look into the lens from immediate proximity.
- Electromagnetic waves: Do not use near people with pacemakers.
Danger of explosion
It is strictly forbidden to use the device in explosive atmospheres and to clean the
Face Hunter with solvents.
TRANSPORT, UNPACKING AND SETTING UP OF THE DEVICE
- The Face Hunter has to be moved and put down on surfaces with suitable stability, in a dry
place and in a non-corrosive environment.
- Stable, non-slip installation surface, which can bear a minimum weight of 10 kg.
- Caution when removing the cardboard casing (glass cladding).
- Pay attention to danger of injury when unpacking and setting up the scanner.
- The Face Hunter must not be connected to the electric circuit during the installation
phase: Danger of electric shock.
- The original packaging has to be kept for at least 1 year.
Safety procedures at the site of the installation
- 5VCDNGƀCVCPFFT[KPUVCNNCVKQPUWTHCEGUHQTVJGGSWKROGPV
- Safety distance of min. 2 m to combustible material.
- Safety distance of min. 2 m to water.