5
Using the headset
1.
Switching on/off the headset
Function
Operation
LED
indicator
Indication
tone
Switch on
the headset
Press
button
for 3-5 seconds,
and release it till
the blue LED is on
Blue LED is on
for 1 second
A long “DI”
tone
Switch off
the headset
Press
button
for 3-5 seconds,
and release it till
the red LED is on
Red LED is on
for 1 second
A long “DI”
tone
Note:
In order to save power, the headset will automatically switch off if no
devices can be connected within 5 minutes after switching on.
2.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function
Operation
LED
indicator
Indication
tone
Enter
into
pairing
mode
Make sure the headset is off
firstly. Press
button for
7-9 seconds, and release it till
the red and blue LEDs blink
alternately
Red and
blue LEDs
blink
alternately.
Two “Du”
tones
Note:
The pairing mode will last 2 minutes, if the headset still can’t pair
with any Bluetooth devices after 2 minutes, it will switch into standby mode
automatically.
Pairing the headset with Bluetooth mobile phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information. The general pairing procedures are as
follows:
1)
Please keep the headset and mobile phone within 1 meter when pairing;
2)
Make the headset enter into pairing mode.(Please refer to “how to enter
pairing mode”);
3)
Activate your mobile phone’s Bluetooth function and set your mobile
phone to search for Bluetooth devices within range, and select