Zipro Strike BW, Руководство пользователя

Страница: 29 / 254

29
EN
STEP 2.
Screw the left and right pedal
(9L/R) to the
crank
(10L/R). Screw the
right pedal
(9R)
bolt on clockwise . Screw the
left pedal
(9L)
on counterclockwise .
NOTE!
The right pedal is marked ‘R’, and the
left pedal is marked ‘L’.
STEP 3 .
Fix the saddle (7) to the saddle guide (35)
using the
flat washer
(36) and
nylon nut
(37).
Then use the
adjustment knob
(34) and the
flat washers
(15) to fix the
saddle guide
(35)
to the saddle post (6).
Having loosened the
knobs
(33)(34), you can
adjust the
saddle
(7) (up/down and
front/rear). When you adjust the saddle,
tighten both
knobs
(33)(34).
CAUTION! Do not exceed the maximum and
minimum height marked on the saddle post
(6) when adjusting the saddle height.
CAUTION!
Before using the device, make
sure the
saddle
(7) is stable in the
guide
(35).
STEP 4.
Slide the
cover
(18) onto the
handlebar
column
(4).
Then carefully connect the computer cable
(21) to the extension (22).
Fix the
handlebar column
(4) to the
main
frame
(1) with
hexagonal socket bolts
(23),
spring washers
(24),
flat washers
(25), and
curved washers
(26) as shown.
Finally, slide the handlebar cover (18) down
and snap it in.