36
ZIPPIE SALSA R
2
/ ZIPPIE SALSA M
2
Rev.2.0
6.12 Headrest
To fit the headrest, fit the location bracket to the push
handles, using the screws and nuts supplied, ensuring that
they are fully tightened.
The headrest height is changed by loosening the
adjustment knob and sliding the inner vertical tube to the
desired position and tightening the knob. The headrest to
seat depth is adjusted by loosening the 6mm Allen screws
and moving the hinge to the desired position and then
tightening the screws securely. To adjust the headrest
angle, loosen the screws at the headrest upholstery,
position the headrest as required and tighten the screws
securely. (Fig. 6.29-6.31)
Fig. 6.26
Fig. 6.27
Fig. 6.28
