TROUBLESHOOTING
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite28
Rolltischsäge / Roll table saw ZI-RTS700
Do a thorough cleaning
Handle all moving parts with an environmentally friendly oil
Never use grease!
16
TROUBLESHOOTING
Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Possible cause
Solution
Once the power supply and press
the power switch, the machine
switches off immediately
(Switch does not hold).
It lacks the network
side, the neutral line
Be remedied by a licensed master
electrician.
Warning:
The blocking of the control button to
work despite the lack of neutral line
can be destroyed by a short time the
switch.
We assume in this case, no Warran-
ty.
The motor of the machine hums
and does not come up to speed.
Check fuses
If necessary, replace blown fuses.
Saw does not brake from turning
off.
Brake switch defective
Replace brake (electrician consult)
