ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
Strana 36
BOURACÍ KLADIVO / DEMOLITION BREAKER ZI-ABH1050/1500
15
MAINTENANCE
A T T E N T I O N
Don’t clean or do maintenance on the machine while it is still connected
to the power supply:
Damages to machine and injuries might occur due to unintended
switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power
supply be-fore any maintenance works or cleaning is carried out
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
Before first operation as well as later on every 100 operation hours you should lubricate all
connecting parts (if required, remove beforehand with a brush all swarfs and dust).
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
The good condition and perfect adjustment of the guiding rollers is essential for a smooth band
guidance and a clean cut.
Store the machine in a closed, dry location.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a
pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
15.1
Maintenance plan
Inspections for the maintenance of the machine
Loose or missing screws
Daily before starting
Damage to any part
Daily before starting
Clean the machine
Daily before starting
Check tool mount to wear of
Every 100 working hours
Change carbon brushes
Every 100 working hours
