OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
31
ZI-KTS40V-AKKU
Checking the chain lubrication:
Start the machine.
Hold running saw chain for some time approx. 15 cm above a suitable surface. If there is
adequate chain lubrication, the oil which is ejected by the saw chain will form a light trail.
13.4
Operation
Inserting/replacing the battery:
Charging the battery as described in the user
manual of the charger.
Press the charged battery into the power tool until
it clicks into place.
To remove, press the release button (
1
.) and pull
out the battery (
2
.).
Switching on:
Ensure that the chain brake is released before
starting the chain saw. To do this, pull the hand
guard back towards the handlebar.
Press the release button and hold down (
1
.).
Press the rear On/Off switch (
2
.). The saw chain
runs.
Release the release button again.
Switching off:
Release the On/Off switch.