ZIPPER MASCHINEN ZI-STM450, Руководство пользователя

Страница: 18 / 43

ASSAMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  18
ZI-STM350 / ZI-STM450
13 ASSAMBLY
 Unpack the stone cutter (Fig. A) and check it for damage which may have occurred in
transit.
Please report hidden transport damages immediately to your reseller.
 Check for completeness of delivery (Fig. C):

Pre-assembled ZI-STM350 / ZI-STM450

4 table feet

Cross fence

Rubber bung

Angle fixing lever

Assembly tools
 For the table feet assembly two persons are required.
 Assemble the 4 table feet to the machine body (Fig. C)
 Remove the transport security lashes from the table, the water tube and the electro cable.
 Remove the hex nut with the flat spanner (Fig. F).
It fixed the motor/saw aggregate for transport.
 Mount the angle fixing lever (Abb. G) instead of the hex nut.
 Put the parallel fence onto the cross fence. Fix it with black fixing knob.
13.1 Prior to Operation
 Close the drain hole with the rubber bung (Abb. E)
 Fill the water basin (8) with clean, cold water.
 Check the water pipe for any bends
 Remove any tool or item from the working plate.
 Check the saw blade for free rotation by turning it by hand. Ensure yourself that the
sliding table (1) does not touch the blade by pushing it to the blade.
 Ensure yourself that (6), (11), (12), and (1) are set correctly and tightened firmly.