ZIPPER MASCHINEN ZI-HAEK4000, Руководство пользователя

Страница: 28 / 37

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  28
ZI-HAEK4000
 Slowly pull the start handle until the resistance is reached, then stop pulling. At that point, the
valves are closed, that will prevent dust and rust from entering the cylinder.
• Store in a dry, out of reach of children place, well packaged.
14.1.11 Disposal
Do not dispose the machine in residual waste. Contact your local authorities for
information regarding the available disposal options. Avoid damage caused by leaking
operating supplies: drain the operating supplies prior to disposal! When you buy at your
local dealer for a replacement unit, the latter is obliged to exchange your old.
15 TROUBLE SHOOTING
A T T E N T I O N
Shut off the machine, let it cool down, disconnect spark plug cap from spark plug
Trouble Possible cause Solution
Engine does not start  Ignition switch defect  Repair or change
 Engine switch OFF  Set the engine switch to ON
 No fuel, or fuel is old and
stale
 Refuel
 Engine oil is low  Add oil
 Spark plug dirty or damaged  Clean or change
 Fuel line faulty  Check fuel line for damage and
kinks
To low power  Air filter dirty  Clean or change
 V-belt  Tighten or change
 Overload  Reduce material feeding
 Blockage  Remove shredded material
 Blades blunt  Replace/ sharpen blades
No automatically
feeding of the
shredded material
 Blades blunt  Replace/ sharpen blades
Machine vibrates or
makes unusual noises
 Screws, nuts or other parts
are loose
 Fix parts
 Impeller or blades have
woody residue or chucks
stuck to them
 Clean the impeller and blades
Engine overheats  Chips and sawdust around
the engine
 Clean the engine surface
 Air filter dirty  Clean or change
Chips do not come out
of the discharge
 Discharge chute or hopper is
clogged.
 Turn of the engine, disconnect the
spark plug, then clean out the
machine
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.