ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
31
ZI-HAEK4100 / ZI-HAEK11000
14.2
Operation
W A R N U N G
The machine will be delivered without any gasoline or oil.
Read also the separately packed operation manual of the engine manufacturer
14.2.1
Refuel, start, stop
see th operation manul of the engine manufacturer
A C H T U N G
To stop the engine quickly in EMERGENCY, simply press the Emergency handle
on the in-feed. Never hesitate in such cases!
N O T I C E
The to be shredded material should be as dry as possible!
To wet material causes clogging
Insert the to be shredded material into the in-feed and when the material
is gripped by the machine and automatically feeded, release the material
immediately
Always feed in material with the thick end first
Saw off long side branches and insert them separately
Never work with too much pressure
Do not overload the machine
In the event of blockages, switch off the engine immediately and eliminate
any malfunctions.
Remove crosswise lying material only when the engine is switched off and
the blades are stopped!
Use a suitable piece of wood (branch) for removal.
Switch off the engine immediately if there are any unusual noise and
vibrations. Repair any faults immediately.
After finishing the shredder work let the machine sufficient time to process the whole shredding
material. This avoids start-up difficulties when working next time!
To be shredded:
Hedge and tree cuttings, bushes, perennial herb, dead flowers
To be not shredded:
Glass, metal, plastic, plastic bags, stones, cloth, roots with soil, food left-overs, fish or meat.
