SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
18
ZI-HDR40V-AKKU
Check the machine for completeness and function before putting it into operation. Use the
machine only if the guards and other protective devices required for the processing are
installed, in good operating condition and correctly maintained.
Ensure sufficient space around the machine!
Use only faultless tools, which are free of cracks and other defects (e.g. deformations).
Check the connections of the machine for strength before each use.
Never leave the running machine unattended. Switch off the machine before leaving the
working area and secure it against unintentional or unauthorized restart.
The machine may only be operated, maintained or repaired by persons who are familiar with
it and who have been informed about the dangers arising in the course of this work.
Make sure that unauthorized persons keep an appropriate safety distance from the machine
and keep children away from the machine.
Always work carefully and with the necessary caution and never use excessive force.
Do not overload the machine!
Shut down the machine and disconnect it from the power supply before adjustment,
changeover, cleaning, service or maintenance work, etc. (remove the battery).
Do not work on the machine if you are tired, not concentrated or under influence of medicine,
alcohol or drugs!
Do not use the machine in areas where vapors of paints, solvents or flammable liquids are
a potential hazard (risk of fire or explosion!).
11.4
Specific safety instructions for this machine
Do not direct the high-pressure jet at persons, active electrical equipment or the
machine itself.
The machine is not suitable to be connected to the drinking water supply directly.
CHARGER:
The charger is only suitable for charging the supplied battery of the machine. Charging
other batteries is not permitted.
Never use the charger in a damp or wet environment.
Only disconnect cable connections by pulling the plug. Pulling at the cable could damage
cable and plug and the electrical safety would not be guaranteed anymore.
Never use the charger if the cable, plug or the device itself is damaged by external
influences. Then take the charger to the nearest specialist workshop.
Do not operate the appliance near heat sources.
Do not use an extension cable to connect the power supply of the charging station.
Do not place metal objects in the area of the charging contacts of the charging station.
Never open the charger. In case of a malfunction, contact a specialist workshop.
Only use the original charger to charge the battery. Using other chargers may cause
defects or fire.
BATTERY:
Vapors may escape if used improperly or if the battery is damaged. These vapors can
irritate the respiratory tract. Supply fresh air and consult a doctor if you have any
complaints.
FIRE HAZARD! Never charge batteries in the vicinity of acids and highly flammable
materials.
Only charge the battery in an ambient temperature between 10° C and +40° C. Let the
battery cool down after heavy charging.
DANGER OF EXPLOSION! Protect battery from heat and fire.
Use battery only in an ambient temperature between 5° C and +40° C.
DANGER OF SHORT CIRCUIT! For disposal, transport or storage the battery must be
packed (plastic bag, box) or the contacts must be taped.
Never open the battery
