ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
28
ZI-TKS315_400V
Take four M4x12 hex head bolts and
four M4 washers and mount part 14 to
part 13
Take four M4x12 hex head bolts, four
M6 washers and four M6 nuts and mount
part 16 (axle) + part 17 (pulley 2x) to
part 4 and part 5. The bolts must not be
tightened too much.
Tighten the bolts in positions A and B
closely. Tighten the bolts in positions C
and D so that the bolt ends are in the
same level as the nuts
Except for bolts in positions H and I,
tighten all the bolts, starting with A and
ending with G