ZIPPER MASCHINEN 9120039232799, Руководство пользователя

Страница: 24 / 42

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  24
ZI-TKS315_400V
13.2 Security instructions
Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator and
limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Keep your work area dry and tidy! An untidy work area may cause accidents.
Avoid slippery floor.
 Make sure the work area is lighted sufficiently!
 Work only in a well ventilated area
 Do not overload the machine!
 Avoid abnormal working postures! Make sure you stand squarely and keep
balance at all times.
 Keep away from the running saw blade!

Always stay focused when working. Reduce distortion sources in your working
environment. The operation of the machine when being tired, as well as under
the influence of alcohol, drugs or concentration influencing medicaments is
forbidden.
 Respectively trained people only and only one person shall operate the
machine.
 Do not allow other people, particularly children, to touch the machine or the
cable. Keep them away from your work area.
 Make your workshop childproof.
 Make sure there is nobody present in the dangerous area. The minimum safety
distance is 2m
 Wear suitable work clothes! Do not wear loose clothing or jewelry as they
might be caught and cause severe accidents!
 Wear a hair net if you have long hair.
 Loose objects can become entangled and cause serious injuries!
 Use personal safety equipment: ear protectors, safety goggles, work wear,
safety gloves (EN 388, class 3111) dust mask (by operating without dust
collector) when working with or on the machine.
 Operation with gloves forbidden!
 Gloves may only used at maintenance work and changing the saw blade
 Never leave the machine running unattended! Before leaving the working area
switch the machine off and wait until the machine stops.
 Always disconnect the machine prior to any actions performed at the machine.
 Avoid unintentional starting
 Do not use the machine with damaged switch
 The plug of an electrical tool must strictly correspond to the socket. Do not use
any adapters together with earthed electric tools
 Each time you work with an electrically operated machine, caution is advised!
There is a risk of electric shock, fire, cutting injury;
 Protect the machine from dampness (causing a short circuit)
 Use power tools and machines never in the vicinity of flammable liquids and
gases (danger of explosion)
 Check the cable regularly for damage
 Do not use the cable to carry the machine or to fix the work piece
 Protect the cable from heat, oil and sharp edges